Skip to content
TestBanker

Free ATI TEAS section practice

ATI TEAS® Math Practice Test

The TEAS Mathematics section is 38 questions in 57 minutes: 34 scored and 4 unscored pretest questions. 18 scored questions test numbers and algebra and 16 test measurement and data, and a calculator is built into the exam. This free TEAS math practice test is 20 questions at the same pace, with every answer worked through at the end.

20 questions, 30 minutes, timed. No account, no email. Every answer explained at the end.

Mathematics gives you about 90 seconds a question, the most generous clock on the TEAS. That time is not for arithmetic, which the built-in calculator does for you. It is for reading a word problem, deciding which quantity it actually asks for, and setting the problem up so the units come out right. Most lost math points on the TEAS are set-up errors, not calculation errors.

The section splits almost evenly between its two sub-areas, so neither can be skipped. Numbers and algebra is fractions, decimals, percents, ratios and equations. Measurement and data is unit conversion, geometry and reading charts. A nursing program cares about both for the same reason: dosage, intake and output, and patient charts are all this math.

The ATI TEAS Mathematics section at a glance

From the exam owner's published figures (ATI TEAS Version 7).

ATI TEAS Mathematics section: length, time and sub-areas
Questions on the exam38
Time for the section57 minutes
Average time per question90 seconds
Share of the scored exam23%
This free practice test20 questions, 30 minutes, at the real section's pace

What the Mathematics section covers

  • Numbers and algebra (18 scored questions): compute with numbers and solve problems that involve algebraic expressions and equations.
  • Measurement and data (16 scored questions): solve measurement problems and read, interpret and reason from data displays.

Free TEAS math practice test questions with answers explained

Mathematics questions from the free ATI TEAS diagnostic, shown complete: a reason for every option, a takeaway and a reference.

Sample question 1 · Mathematics

A student volunteer at a clinic recorded how many patients checked in during each hour of a 12-hour day. The supervisor wants to see at a glance how the check-in count rose and fell as the day went on. Which type of data display should the student create first?

  1. AA stem-and-leaf plot of the 12 counts
  2. BA circle graph divided into 12 sectors
  3. CA Venn diagram comparing morning and afternoon
  4. DA line graph with hours on the horizontal axis
Show the answer and the explanation for every option

Correct answer: D. A line graph with hours on the horizontal axis

  • AIncorrect. A stem-and-leaf plot organizes values by size to show their distribution. It drops the time order, so it cannot show change across the day.
  • BIncorrect. A circle graph shows how parts make up a whole. It does not show order in time, so a pattern of rising and falling through the day would be hidden.
  • CIncorrect. A Venn diagram shows overlap between groups or categories. It is not a tool for showing how a quantity changes from one hour to the next.
  • DCorrect. Correct. A line graph connects values measured over time, so rises and falls across the 12 hours are easy to see as the line goes up and down.

Takeaway: When the goal is to show how one quantity changes over time, a line graph is the display to reach for; circle graphs show parts of a whole and stem-and-leaf plots show distribution.

Memory aid: Time on the line: trends over time belong on a line graph.

Reference: ATI TEAS Study Guide for TEAS Version 7 (Assessment Technologies Institute); ATI TEAS Exam Details (ATI)

Blueprint task: Mathematics. Measurement and data (16 scored questions): solve measurement problems and read, interpret and reason from data displays.

Sample question 2 · Mathematics

An urgent care clinic tracks patient wait times in two sessions. In the morning session, 8 patients were seen and their average wait was 20 minutes. In the afternoon session, 24 patients were seen and their average wait was 32 minutes. The clinic director wants the average wait time for all 32 patients seen that day. What was the average wait time for the whole day, in minutes?

  1. A26
  2. B29
  3. C32
  4. D23
Show the answer and the explanation for every option

Correct answer: B. 29

  • AIncorrect. This simply averages the two averages, (20 + 32) ÷ 2. That only works when both groups are the same size. Here the afternoon had three times as many patients, so it must count for more.
  • BCorrect. To combine averages from groups of different sizes, rebuild the totals. Morning: 8 × 20 = 160 minutes. Afternoon: 24 × 32 = 768 minutes. Total 928 minutes over 32 patients gives 928 ÷ 32 = 29 minutes.
  • CIncorrect. This is the afternoon average alone. The afternoon group is larger and pulls the overall average toward it, but the 8 morning patients still lower the day's average below 32.
  • DIncorrect. This weights the two sessions backward, giving the small morning group the afternoon's weight and vice versa: (8 × 32 + 24 × 20) ÷ 32. Each average must be multiplied by its own session's patient count.

Takeaway: To combine averages of groups with different sizes, multiply each average by its group size, add the totals, and divide by the combined count; do not average the averages.

Memory aid: Average of averages only works for equal groups. Otherwise: rebuild each total (mean × count), add, then divide by the grand total count.

Reference: Prealgebra 2e (Marecek, Anthony-Smith and Mathis, OpenStax), 5.5; ATI TEAS Study Guide for TEAS Version 7 (Assessment Technologies Institute)

Blueprint task: Mathematics. Measurement and data (16 scored questions): solve measurement problems and read, interpret and reason from data displays.

Sample question 3 · Mathematics

A research nurse runs a study in which each patient is given one of several different doses of a new pain medication, and the drop in each patient's reported pain score is measured two hours later. She needs to label the variables correctly before making a graph. Which description correctly identifies the variables in this study?

  1. AThe dose is the independent variable and the number of patients is the dependent variable
  2. BThe two-hour wait is the independent variable and the dose is the dependent variable
  3. CThe dose is the independent variable and the drop in pain score is the dependent variable
  4. DThe drop in pain score is the independent variable and the dose is the dependent variable
Show the answer and the explanation for every option

Correct answer: C. The dose is the independent variable and the drop in pain score is the dependent variable

  • AIncorrect. The number of patients is a fixed part of the study design, not an outcome that changes in response to the dose. Confusing sample size with the measured result leads to this choice.
  • BIncorrect. The two-hour wait is held constant for everyone, so it is a controlled condition, not a variable being tested. The dose is set by the researcher, so it cannot be the dependent variable.
  • CCorrect. The nurse chooses and controls the dose, and the drop in pain score is what is measured to see how it responds. The controlled input is independent; the measured outcome is dependent.
  • DIncorrect. This reverses the roles. The pain score drop is observed as a result; it does not determine the dose. People choose this when they think of the outcome as the main variable of interest.

Takeaway: The independent variable is what the researcher changes on purpose; the dependent variable is what is measured to see the effect, and it goes on the vertical axis.

Memory aid: The Dependent variable Depends on what you Did: it is the result you measure.

Reference: ATI TEAS Study Guide for TEAS Version 7 (Assessment Technologies Institute); Biology 2e (Clark, Douglas and Choi, OpenStax), 1.1

Blueprint task: Mathematics. Measurement and data (16 scored questions): solve measurement problems and read, interpret and reason from data displays.

Sample question 4 · Mathematics

A laboratory aide needs 0.3 of a 0.25-gram sample for a test. The aide multiplies 0.25 by 0.3 and records the result as 0.75 gram. A supervisor rechecks the arithmetic. What is the correct product of 0.25 and 0.3?

  1. A0.075
  2. B7.5
  3. C0.0075
  4. D0.75
Show the answer and the explanation for every option

Correct answer: A. 0.075

  • ACorrect. Correct. Multiply as whole numbers: 25 × 3 = 75. The factors have two and one decimal places, so the product needs three decimal places: 0.075. A fraction of a 0.25-gram sample must be smaller than 0.25, which confirms the answer.
  • BIncorrect. Wrong. This result comes from counting only one decimal place. It is much larger than the original sample, which is impossible for a part of the sample.
  • CIncorrect. Wrong. This result uses four decimal places. People sometimes add an extra place by counting the leading zero in 0.3 as a decimal place.
  • DIncorrect. Wrong. This counts only two decimal places instead of three. It also cannot be right because 0.3 of a 0.25-gram sample must be less than 0.25 gram.

Takeaway: When multiplying decimals, the product has as many decimal places as the two factors combined; a sanity check is that a fraction of a quantity must be smaller than the quantity.

Memory aid: Count the decimal places in both factors, add them, and give the product that many places.

Reference: Prealgebra 2e (Marecek, Anthony-Smith and Mathis, OpenStax), 5; ATI TEAS Study Guide for TEAS Version 7 (Assessment Technologies Institute)

Blueprint task: Mathematics. Numbers and algebra (18 scored questions): compute with numbers and solve problems that involve algebraic expressions and equations.

Sample question 5 · Mathematics

A nursing assistant records a patient's fluid intake for one meal: 3/4 cup of water, 2/3 cup of juice, and 1 1/2 cups of broth. How many cups did the patient drink in total?

  1. A2 11/12 cups
  2. B2 5/12 cups
  3. C2 3/4 cups
  4. D1 11/12 cups
Show the answer and the explanation for every option

Correct answer: A. 2 11/12 cups

  • ACorrect. Correct. Using a common denominator of 12: 9/12 + 8/12 + 1 6/12 = 1 23/12, and 23/12 regroups to 1 11/12, giving 2 11/12 cups.
  • BIncorrect. Wrong. This comes from changing 2/3 to 2/12 without scaling the numerator. When the denominator is multiplied by 4, the numerator must be too: 2/3 = 8/12.
  • CIncorrect. Wrong. This is the total if 2/3 is rounded to 1/2 before adding. Estimation is fine for a check, but an intake record needs the exact sum.
  • DIncorrect. Wrong. This results from adding the fraction parts correctly but forgetting to carry the extra whole from 23/12 into the whole-number total.

Takeaway: To add fractions with unlike denominators, rewrite each with a common denominator, scaling numerators to match, add, and regroup any improper fraction into the whole number.

Reference: Prealgebra 2e (Marecek, Anthony-Smith and Mathis, OpenStax), 4.6; ATI TEAS Exam Details (ATI)

Blueprint task: Mathematics. Numbers and algebra (18 scored questions): compute with numbers and solve problems that involve algebraic expressions and equations.

What to know for the ATI TEAS Mathematics section

Fractions, decimals and percents

  • To turn a fraction into a decimal, divide the top by the bottom: 3/8 is 0.375. To turn a decimal into a percent, move the point two places right: 0.375 is 37.5%.
  • Compare fractions by converting to decimals or to a common denominator: 5/9 is about 0.556 and 4/7 about 0.571, so 4/7 is the larger. Check, don't eyeball.
  • Percent of a number: 15% of 240 is 0.15 × 240 = 36. Finding the whole from a part: if 36 is 15% of a number, the number is 36 ÷ 0.15 = 240.
  • Two successive changes do not add: a 20% increase followed by a 20% decrease leaves 96% of the start (1.2 × 0.8 = 0.96), not 100%.
  • To add or subtract fractions, find a common denominator first: 2/3 + 1/4 = 8/12 + 3/12 = 11/12. To multiply, multiply straight across.
  • A mixed number such as 2 3/5 becomes an improper fraction by multiplying the whole number by the denominator and adding the numerator: 13/5.

Ratios, rates and proportions

  • A ratio of 3:5 means 3 parts to 5 parts, 8 parts in all. If 40 students are split 3:5, the groups are 15 and 25.
  • A unit rate divides to one of something: 300 miles in 5 hours is 60 miles per hour. Compare offers by unit price, not by package price.
  • Set up a proportion with the same units in the same positions: 2 tablets / 50 mg = x tablets / 125 mg gives x = 5 tablets.
  • Direct variation means both quantities grow together (more hours, more pay). In inverse variation, one rises as the other falls (more workers, fewer days).
  • Scale drawings are proportions: on a 1 inch : 4 feet plan, a 3.5 inch wall is 14 feet long.

Expressions, equations and inequalities

  • Solve a linear equation by undoing operations in reverse order: 3x − 7 = 11 becomes 3x = 18, so x = 6. Check by substituting back.
  • Distribute before combining: 4(x + 3) − 2x = 4x + 12 − 2x = 2x + 12.
  • Translate words carefully: "5 less than a number" is n − 5, not 5 − n. "The product of 3 and a number, increased by 4" is 3n + 4.
  • Combine only like terms: 3x² and 3x are different terms and stay separate.
  • An inequality's solution is a range. x + 4 > 9 means x > 5, and on a number line that is an open circle at 5 shaded to the right.
  • Two equations with two unknowns can be solved by substitution: if y = 2x and x + y = 12, then 3x = 12, so x = 4 and y = 8.

Measurement and conversions

  • Chain conversions as fractions so the units cancel: 90 minutes × (1 hour / 60 minutes) = 1.5 hours.
  • Metric steps are powers of ten: 1 g = 1,000 mg, 1 mg = 1,000 mcg, 1 L = 1,000 mL, 1 m = 100 cm.
  • Temperature: °F = (9/5 × °C) + 32 and °C = 5/9 × (°F − 32). Body temperature 37 °C is 98.6 °F.
  • Customary volume: 8 fluid ounces in a cup, 2 cups in a pint, 2 pints in a quart, 4 quarts in a gallon.
  • Area is in square units and volume in cubic units. A box 4 cm by 3 cm by 2 cm holds 24 cubic centimeters, which is also 24 mL.
  • Perimeter adds the sides; area of a triangle is ½ × base × height; the Pythagorean theorem, a² + b² = c², gives a right triangle's long side.

Reading data and statistics

  • Read a graph's title, axes and units before the data. A bar chart in thousands is a common trap.
  • An outlier pulls the mean toward it but barely moves the median. For skewed data such as incomes, the median is the better center.
  • A histogram groups values into ranges; a box plot shows the median, the quartiles and the spread; a pie chart shows parts of one whole.
  • Probability is favorable outcomes divided by possible outcomes. A single six-sided die gives a 1/6 chance of a 4.
  • On a scatter plot, a line of best fit shows the trend. Points far from the line are weakly described by it.

Common ATI TEAS Mathematics mistakes

  • Answering the number you calculated instead of the number asked for

    Underline the question's last sentence before you start. If it asks for the remaining amount or the difference, the first number you get is usually a step, not the answer.

  • Dropping units halfway through a conversion

    Write every step with its units and cancel them. If the answer comes out in mg per hour and the options are in g per hour, you are one step short.

  • Adding percent changes

    Multiply the factors instead: a 10% raise then a 10% cut is 1.1 × 0.9 = 0.99, a 1% loss overall.

  • Reversing a subtraction phrase

    "Less than" and "subtracted from" reverse the order of the words. Read "7 less than x" as x − 7.

  • Trusting the calculator over an estimate

    Estimate first: 19.8% of 401 is about 80. If the calculator says 8 or 800, a decimal slipped.

  • Spending three minutes on one problem

    At 90 seconds a question, a stuck problem costs you the next one. Flag it, move on, and come back with the time you banked on easier items.

How to use a TEAS math practice test

Take the first set cold and on the clock, so the score tells you something. Then sort every miss into one of three piles: did not know the method, set it up wrong, or made a slip. Each pile has a different fix: learn the rule, practise translating words into equations, or slow down and check units.

Numbers and algebra and measurement and data are scored as one section, but your misses will cluster. If most fall in conversions and data, that is 16 scored questions you can move quickly by drilling unit chains and graph reading.

Practise with an on-screen calculator rather than your phone or a handheld. The exam's calculator is built in and personal calculators are not allowed, so practise the clicking, not just the math.

TEAS math formulas worth knowing by heart

We found no statement on ATI's pages that a formula sheet is provided, so prepare as if you will need these yourself:

  • Percent change = (new − original) ÷ original × 100
  • Simple interest = principal × rate × time
  • Rectangle: area = length × width; perimeter = 2(length + width)
  • Triangle: area = ½ × base × height; right triangle: a² + b² = c²
  • Circle: area = πr²; circumference = 2πr (or π × diameter)
  • Rectangular box: volume = length × width × height
  • Cylinder: volume = πr² × height
  • °F = 9/5 °C + 32; °C = 5/9 (°F − 32)
  • Mean = sum ÷ count; range = highest − lowest

TEAS math practice test FAQ

Is the TEAS math section hard?

The content stops around early algebra, geometry and basic statistics, and the clock is the most generous on the exam at about 90 seconds a question. Where people lose points is word problems: choosing what to calculate and keeping units straight. ATI publishes no pass rate or section difficulty figures, so your own timed practice score is the best measure.

What type of math is on the ATI TEAS?

Two sub-areas. Numbers and algebra (18 scored questions) covers fractions, decimals, percents, ratios, proportions, expressions and equations. Measurement and data (16 scored questions) covers unit conversions, geometry measurements and reading charts, graphs and tables.

Can you use a calculator on the TEAS math section?

Yes, one is built into the exam. ATI's help center says personal calculators are not allowed, so practise on an on-screen calculator.

Do they give you formulas on the TEAS?

We found no ATI statement that a formula sheet is provided. Learn the common ones yourself: percent change, area and perimeter, the Pythagorean theorem, circle area and circumference, volume and the temperature conversions listed on this page.

How many math questions are on the TEAS 7?

38: 34 scored and 4 unscored pretest questions, in 57 minutes. You cannot tell which questions are unscored, so treat every one as counting.

Is there a free ATI TEAS math practice test?

Yes. This page has a free 20-question TEAS math practice test, timed at the section's pace, with no account needed and every answer explained when you finish.

ATI TEAS® is a registered trademark of Assessment Technologies Institute, LLC (ATI). This site is an independent study resource and is not affiliated with, endorsed by, or sponsored by ATI. Practice questions here are original and are not actual TEAS exam questions.